![]() ![]() Continue to pour until you have achieved the desired cast thickness (6¨圆¨圆¨ max) or up to 2¨ max river depth. ![]() Pouring: Slowly pour epoxy into a wood slab river, mold, or casting. Work Time: Prior to product beginning to gel, work time may be as long as 2-4 hours depending on air temp, pour depth, width, length and overall epoxy mass. Pot-Life: Product in a mixing container may last 2-3 hours before beginning to gel. Pre-seal wood, live-edges, and substrates with WiseBond® Quick Set Seal Epoxy (let cure) to prevent air bubbles and foaming prior to your deep pour. ![]() If more than 1 kit is needed, measure and mix multiple 2:1 batches combine and mix each batch together to create a homogeneous blend before final pour.ĬAUTION: Mix slowly to not introduce air into the mixture, as it can cause bubbles. This ensures no unmixed A or B contaminates the final pour. Pour mixed epoxy into a second clean mixing container and mix for 1 minute. Add colorants when epoxy is completely mixed. Mixing: Use a clear mixing bucket with exact mix ratios printed on the side! Pour 2 parts Resin-A to 1 part Hardener-B and mix thoroughly for 6 to 8 minutes with a paint stick or paddle mixer attached to a drill until swirls and tails disappear. ONLY use A and B when liquid temp 77☏ or under to prevent premature curing. If crystals are present in A or B, place the closed containers in 120☏ tap water until crystals dissolve. If the A and B are cooler than 65☏, warm the closed containers in hot tap water. Work space air temp should be no warmer than 77☏, free of dirt and dust. ![]() Low heat, VOC free, and Low odor makes this product perfect for the professional, DIYers, artists, the everyday woodworker, or hobbyist.īefore Combining: Resin-A and Hardener-B liquid temp should be between 65☏ and 77☏ before mixing. Perfect for wood/epoxy tables, lathe turning, art, and object casting. WiseBond® Deep Pour Epoxy is a 2:1 ratio epoxy system allowing for 1/2¨ up to 2¨+ of depth in a single pour. WiseBond ® Deep Pour Epoxy 2:1 Ratio This product will work well with wood, glass, ceramic, stone aggregate, cement, electronic parts and most metals. ![]()
0 Comments
Leave a Reply. |